Basic Conditions:
| Start Point | Range | ||
| Melt Temp | 220°C | 200-230°C | |
| Barrel Zone Temp. | Rear | 190°C | 180-210°C |
| Center | 205°C | 190-220°C | |
| Front | 215°C | 200-230°C | |
| Mold Temp. | 50°C | 30-60°C | |
| Processing Temp. Limit | 245°C | ||
| Injection Speed | Slow to Moderate | ||
| Pre-Dry Requirements | 70-80°C, 2hr | ||
Specification data:
| Test Project | Test Methods | Unit | Typical Values [1] |
| Tensile Stress | GB/T1040-92 | Mpa | 28-40 |
| Flexural Stress | GB/T 9341-2000 | Mpa | 48 |
| Flexural Modulus | GB/T9341-2000 | Mpa | ≥1600 |
| Notched Impact Strength | GB/T1043-93 | KJ/m2 | ≥10 |
| Elongation At Break | GB/T1040-92 | % | 40-80 |
| Heat Distortion Temperature | GB/T1634-2004 | °C | ≥85 |
| MFR | GB/T 3682-2000 | g/10min | 10-40 |
| Flammability | GB/T 2408-1996 | UL94 | V-0 |
| Testing Condition | 23±2°C, 50±5%RH | ||
Application:
(1) Shell of Electrical Equipment
(2) Electrical Tool Accessories
(3) Circuit Board Base
(4) Other Use
Be the first to review “Plastic Scraps ( LDPE | HDPE | PET | PP | LLDPE)”
Related products
SCRAPS
SCRAPS
SCRAPS
SCRAPS
SCRAPS
SCRAPS
SCRAPS
SCRAPS
Reviews
There are no reviews yet.